ArmorBak™REDESIGNED!

AVAILABLE COLORS

  • MultiCam
  • Coyote
MULTICAM: 62591

ArmorBak™REDESIGNED!

Hydration is great, but so is ballistic armor. Now you can have both with the ArmorBak™. Lightweight and simple to use, the Armorbak™ is deigned specifically to attach to the back of the IOTV, MTV or any other vest that offers a MOLLE/PAL back panel. Quick Attach Pressure Straps increase the flow from the low profile reservoir and stabilize the load. Includes the 100 oz (3 L) Mil Spec Antidote™ Short Reservoir.

AVAILABLE COLORS

  • MultiCam
  • Coyote
MULTICAM: 62591
 WHERE TO BUY

Hydration is great, but so is ballistic armor. Now you can have both with the ArmorBak™. Lightweight and simple to use, the Armorbak™ is deigned specifically to attach to the back of the IOTV, MTV or any other vest that offers a MOLLE/PAL back panel. Quick Attach Pressure Straps increase the flow from the low profile reservoir and stabilize the load. Includes the 100 oz (3 L) Mil Spec Antidote™ Short Reservoir.

YOU MAY ALSO LIKE

  • PRODUCT FEATURES
    Key Pack Features:

    The CamelBak® Direct Armor Attachment System (D.A.A.S.™) allows pack to be attached directly to IOTV or MTV without interfering with the rapid removal mechanism.

    Simple side release buckles for quick attachment and removal from vest

    The Quick Attach Pressure Strap increases stability and makes on-the-move hydration, rinsing glasses and goggles easier

    Low-profile 100 oz reservoir for reduced profile in tight areas and riding in vehicles

    500D Rip-Stop Cordura® Fabric

    CamelBak® Got Your Bak™ Guarantee:
    If we build it, we'll Bak it™ with our lifetime guarantee.
    Reservoir Features:
    100 oz Mil Spec Antidote™ Short with easy-to-fill and clean wide-mouth opening, rugged and durable material, leak-proof ¼-turn cap, insulated PureFlow™ tube, patented Big Bite™ Valve, Quick Link™ Exit Port and Drink Port, QL HydroLock™ one-handed flow control.
  • PRODUCT SPECIFICATIONS
    • Hydration Capacity: 100 oz (3 L)
    • Total Volume: 183 cu in (3 L)
    • Pack Weight: 0.5 lbs (.22 kg) with empty reservoir
    • Pack Dimensions: 16 in x 10 in x 3 in (40.6 cm x 25.4 cm x 7.6 cm)
    • Materials: 500D Cordura® Fabric front panel and yoke > 210D Nylon lining > Nylon webbing > 5 mm closed cell foam
    • Includes the 100 oz (3 L) Mil Spec Antidote™ Short Reservoir with Quick Link™ Exit Port
  • PRODUCT CARE

    PACK CLEANING
    We recommend wiping your pack with a damp cloth to remove dirt. If the pack is extremely dirty and needs a deeper cleaning, soak it in cool or warm water with a very mild soap. Rinse the pack thoroughly with cool water. If soap residue remains in the fabric, it may create suds if exposed to water or sweat.

    DO NOT wash your pack in a washing machine. Machine washing may damage the pack or affect the integrity of the fabric and fasteners, and will void the Got Your Bak™ Guarantee.

    RESERVOIR CLEANING
    The best way to care for your reservoir is to clean and dry it after every use, especially if you fill the reservoir with anything other than water. However, if a reservoir has not been cleaned after every use, and mold or discoloration develops:

    1. Use hot water and a CamelBak Cleaning Tablet. (Or use 2 tablespoons of baking soda or bleach instead of CamelBak Cleaning Tab.) Mix the solution inside your reservoir and elevate the reservoir above the tube and Big Bite Valve. Pinch the bite valve, allowing the solution to flow into the drink tube and fill the bite valve.

    2. Let the reservoir and cleaning solution sit in the reservoir and drink tube for about 30 minutes.

    3. Wash the reservoir with hot water and mild soap. Be sure to completely rinse away the cleaning solution in the reservoir and drink tube before using again. You can also use CamelBak brushes from our Cleaning Kit to scrub your reservoir and drink tube. Brushes are the best way to ensure you are scrubbing all of the areas of the reservoir clean.

    4. Once the reservoir is clean, be sure to air dry overnight so no moisture is trapped inside, which can cause mold to grow.

    These steps will make your reservoir safe for use. If there are still spots left behind, these are permanent mold stains that may not be removable. However, your reservoir is still safe and usable after you’ve cleaned it.

  • VIDEOS

PRODUCT OVERVIEW